NOTE:
Requires optical transceivers and switch cabling which must be supplied
separately.
The HP 3PAR StoreServ 7400 16Gb Virtualization Base System SAN Kit includes
the HP 3PAR StoreServ 7400 2-node Storage Base and (2) QK753B HP SN6000B
16 Gb/s 48-port/24-port Active FC Switches -dual power. Each switch comes with
rack mount kit (including rails, mounting hardware, and plenum), RJ-45 serial
cable with adaptor for RJ-45 to DB9, power cords, and SAN Network Advisor DVD.
Also included is a 3 year warranty for the switches.
NOTE:
Requires optical transceivers and switch cabling which must be supplied
separately.
All base configurations include built-in Gigabit Ethernet ports for management
and Remote Copy over IP.
*Storage Centric Configuration
The Storage Centric rack versions of HP 3PAR StoreServ 7200 and 7400 are for
CTO (factory Configure-To-Order) only. With a Storage Centric configuration, the
storage system gets placed in the center of the rack so that future expansion of
that storage system becomes easier.
In Storage Centric configurations, non-3PAR components, with the exception of
certain StoreFabric Storage Networking switches, if added to the same order, get
placed in a separate rack.
The following diagrams show a HP 3PAR StoreServ 7400 4-node Storage System in Storage Centric and non-Storage Centric
configurations
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
DA - 14433 North America — Version 18 — January 17, 2014
Page 10
