Removal and replacement procedures 102
6.
Connect the seven electrical cables to the front of the water group controller.
7.
Replace the AC transfer switch ("
Replacing the AC transfer switch
" on page
28
).
8.
Complete the operation checklist (on page
111
).
Water inlet coupling
The water inlet coupling is located on the inlet water hose connected to the MCS unit.
The following tools are required for installation:
•
5-mm Allen wrench
Removing the water inlet coupling
1.
Power down the MCS unit. ("
Powering down the MCS unit
" on page
24
)
2.
Shut off the water flowing into the MCS unit. ("
Shutting off the water
" on page
25
)
Summary of Contents for 403349-003
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 15: ...Customer self repair 15 ...
Page 16: ...Customer self repair 16 ...
