Removal and replacement procedures 82
6.
Reconnect the temperature sensor cable to the heat exchanger unit.
7.
Slide the insulation back in place on the In or Out water hose up against the coupling.
8.
Replace the air deflector plate ("
Replacing the air deflector plate
" on page
34
).
9.
Replace the fan unit ("
Replacing the fan unit
" on page
52
).
10.
Restore water flow to the MCS unit ("
Restoring water flow
" on page
112
).
11.
Complete the operation checklist (on page
111
).
Magnetic solenoid valve
The magnetic solenoid valve is a component of the water group located at the bottom interior of the MCS
unit.
The following tools are required for installation:
•
T-25 Torx driver
•
Phillips screwdriver
Removing the magnetic solenoid valve
1.
Power down the MCS unit ("
Powering down the MCS unit
" on page
24
).
Summary of Contents for 403349-003
Page 13: ...Customer self repair 13 ...
Page 14: ...Customer self repair 14 ...
Page 15: ...Customer self repair 15 ...
Page 16: ...Customer self repair 16 ...
