The optical disc tray does not open for removal of a CD,
DVD, or BD
1.
Insert the end of a paper clip
(1)
into the release access in the front bezel of the drive.
2.
Press in gently on the paper clip until the disc tray is released, and then pull out the tray
(2)
until it
stops.
3.
Remove the disc
(3)
from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:
If the tray is not fully accessible, tilt the disc carefully as you remove it.
4.
Close the disc tray and place the disc in a protective case.
The computer does not detect the optical drive
If Windows does not detect an attached device, the device driver software may be missing or corrupted.
If you suspect that the DVD/CD-ROM drive is not being detected, verify that the optical drive is listed in
the Device Manager utility.
1.
Remove any discs from the optical drive.
2.
Click
Start
and type
device manager
in the
Start Search
box.
As you type, search results are listed in the pane above the box.
3.
In the results pane, click
Device Manager
. If prompted by User Account Control, click
Continue
.
4.
In the Device Manager window, click the plus (+) sign next to
DVD/CD-ROM drives
, unless a minus
(-) sign is already showing. Look for an optical drive listing.
The optical disc tray does not open for removal of a CD, DVD, or BD
29
