Switch cover
Description
Spare part number
For use only with computer models with wireless LAN capability (includes wireless
button and wireless light)
441623-001
For use only with computer models without wireless LAN capability
441624-001
Before removing the switch cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery on page 29
).
Remove the switch cover:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Remove the seven Phillips PM2.0×9.0 screws
(1)
and the four Phillips PM2.0×2.0 screws
(2)
that
secure the switch cover to the computer.
3.
Turn the computer display-side up, with front toward you.
4.
Open the computer as far as possible.
38
Chapter 5 Removal and replacement procedures
ENWW
