2.
Lift the processor
(2)
straight up and remove it.
NOTE
The gold triangle
(3)
on the processor should be aligned with the triangle
(4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Speaker
Description
Spare part number
Speaker
441627-001
Before removing the speaker, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery on page 29
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 30
)
b.
Memory/Mini PCI card module compartment cover (see
Memory module on page 32
)
c.
Optical drive (see
Optical drive on page 36
)
d.
Switch cover (see
Switch cover on page 38
)
e.
Keyboard (see
Keyboard on page 40
)
f.
Display assembly (see
Display assembly on page 44
)
g.
Base enclosure (see
Base enclosure on page 49
)
56
Chapter 5 Removal and replacement procedures
ENWW
