111
•
Server timeout timer (
server-timeout
)—Starts when the access device sends a RADIUS
Access-Request packet to the authentication server. If no response is received when this timer
expires, the access device retransmits the request to the server.
•
Client timeout timer
(supp-timeout
)—Starts when the access device sends an EAP-Request/MD5
Challenge packet to a client. If no response is received when this timer expires, the access device
retransmits the request to the client.
•
Username request timeout timer (
tx-period
)—Starts when the device sends an EAP-Request/Identity
packet to a client in response to an authentication request. If the device receives no response before
this timer expires, it retransmits the request. The timer also sets the interval at which the network
device sends multicast EAP-Request/Identity packets to detect clients that cannot actively request
authentication.
Related commands:
display dot1x
.
Examples
# Set the server timeout timer to 150 seconds.
<Sysname> system-view
[Sysname] dot1x timer server-timeout 150
dot1x unicast-trigger
Syntax
dot1x unicast-trigger
undo dot1x unicast-trigger
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the
dot1x unicast-trigger
command to enable the 802.1X unicast trigger function.
Use the
undo dot1x unicast-trigger
command to disable the function.
By default, the unicast trigger function is disabled.
The unicast trigger function enables the network device to initiate 802.1X authentication when it receives
a data frame from an unknown source MAC address. The device resends the packet if it receives no
response within a period of time (set with the
dot1x timer tx-period
command). This process continues
until the maximum number of retries (set with the
dot1x retry
command) is reached.
Related commands:
display dot1x
,
dot1x timer tx-period
, and
dot1x retry
.
Examples
# Enable the unicast trigger function for interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x unicast-trigger
