27
The next time you attempt to log in through the console port, you do not need to provide any username
or password, as shown in
.
Figure 8
Accessing the CLI through the console port without authentication
Configuring password authentication for console login (not
supported in FIPS mode)
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter AUX user interface view.
user-interface aux
first
-
number
[
last-number
]
N/A
3.
Enable password
authentication.
authentication-mode password
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3 after login.
4.
Set a password.
set authentication password
{
cipher
|
simple
}
password
By default, no password is set.
5.
Configure common settings
for console login.
See "
Optional.
The next time you attempt to log in through the console port, you must provide the configured login
password, as shown in
