114
Task Command
Display RMON private alarm
entries.
display rmon prialarm
[
entry-number
]
Display RMON event entries.
display rmon event
[
entry-number
]
Display log information for
event entries.
display rmon eventlog
[
entry-number
]
Ethernet statistics group configuration example
Network requirements
Create an RMON Ethernet statistics entry on the device in
to gather cumulative traffic statistics
for Ten-GigabitEthernet 1/0/1.
Figure 36
Network diagram
Configuration procedure
# Create an RMON Ethernet statistics entry for Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for Ten-GigabitEthernet 1/0/1.
<Sysname> display rmon statistics ten-gigabitethernet 1/0/1
EtherStatsEntry 1 owned by user1 is VALID.
Interface : Ten-GigabitEthernet1/0/1<ifIndex.3>
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Incoming packets by size:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# Get the traffic statistics from the NMS through SNMP. (Details not shown.)
Summary of Contents for 5920
Page 86: ...76 XGE1 0 2 N A P2P Two 0 ...
