3.
Clear
Capture Performance data
. If you want to gather switch performance data, leave this option
selected. Selecting this option will increase the amount of time required to collect the switch data.
4.
Select
Mask IP Address
check box if you do not want to send the IP address information (in the
raw report) outside your network.
5.
Select a format for the report by selecting
HTML Report
or
Microsoft Excel Report
check box.
6.
Click
Start Data Collection
. If you have selected the option to collect switch performance data, it
will take at least 10 minutes to collect the data.
7.
Select
Launch Default Mail Client
. The location of the report is displayed.
8.
Manually attach the raw report created with subject line: “HP StorageWorks Essentials SAN
Visibility Report Request”. Send the report to the following e-mail address:
SAN_Visibility@hp.com
.
An automated email response is mailed back confirming the receipt of the raw data file.
The report will be processed and the formatted report returned to you within one business day.
9.
When you receive the formatted report, save it to a temporary location on the management
server. A sample report is shown in
Figure 5
.
Figure 5 Sample SAN Visibility report
.
Reading the report
1.
Save the attached file (
.hppr
file) to a preferred location. Do not change the file extension.
2.
Double-click the saved file to extract the processed report. The processed report is extracted and
stored at:
<Install_Dir>\ExtractedProcessReports\<SAN Name>\
.
3.
Navigate to the saved location and double-click the
index.html
file to open the report in your
browser.
4.
In the left navigation pane, click
High Level Fabric Summary
.
The High Level Fabric Summary window opens. See
Figure 5
.
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide (XCS
6.220)
23
Summary of Contents for 6100
Page 8: ...8 ...
Page 44: ...Pre upgrade tasks 44 ...
Page 64: ...Upgrading the Enterprise Virtual Array 64 ...
Page 66: ...Downgrading the Enterprise Virtual Array 66 ...
