Installation Procedures 14
ENWW
If Required, Configure Jetdirect With
Your Network Settings
If your network requires that you configure network settings on the
print server before you add the printer to your network systems,
you can do so now.
However, in most cases, you can skip this section.
Instead, you can
proceed directly to
Add the Printer to Your Network Server or
System
. Use network installation software to both configure basic
network settings on the print server, and add the printer to your
system configuration.
Configuration Tools
●
For Microsoft Windows
systems, use the network
setup software on the CD-
ROM supplied with your
printer (recommended), or
on the HP Jetdirect
CD-ROM supplied with
the print server. This
software will allow you to both configure the print server for
operation on your network
and
add the printer to your system.
See
Add the Printer to Your Network Server or System
.
Note
Printer CD-ROM software may not support printer
setup on Novell NetWare or other networks. See
your printer documentation for supported
networks.
●
For TCP/IP networks, use
a Web browser to access
the embedded Web server
on the HP Jetdirect print
server. The Web pages on
the print server allow you
to configure network
parameters.
(Recommended) Use your
network-ready printer
CD-ROM.
Or, use the HP Jetdirect
CD-ROM.
EIOSG.book Page 14 Thursday, October 9, 2003 1:42 PM
