•
Restarting the system (see
Restarting the System
).
•
Uninitializing the system (see
Uninitializing the System
).
To ensure that you do not mistakenly activate a shutdown procedure, the default state is always NO,
indicating
do not implement this procedure
. As a safeguard, implementing any shutdown method
requires you to complete at least two actions.
Table 16 Shutdown methods
Description
LCD prompt
Implementing this procedure establishes communications between the storage
system and HP Command View EVA. This procedure is used to restore the
controller to an operational state where it can communicate with HP Command
View EVA.
Restart System?
Implementing this procedure initiates the sequential removal of controller
power. This ensures no data is lost. The reasons for implementing this proced-
ure include replacing a drive enclosure.
Power off system?
Implementing this procedure will cause the loss of all data. For a detailed
discussion of this procedure, see
Uninitializing the System
.
Uninitialize?
Shutting the controller down
Use the following procedure to access the
Shutdown System
display and execute a shutdown procedure.
NOTE:
HP Command View EVA is the preferred method for shutting down the controller. Shut down the
controller from the OCP only if HP Command View EVA cannot communicate with the controller.
Shutting down the controller from the OCP removes power from the controller on which the procedure
is performed only. To restore power, toggle the controller’s power.
CAUTION:
If you decide NOT to power off while working in the Power Off menu,
Power Off System NO must
be displayed before you press
Esc
. This reduces the risk of accidentally powering down.
1.
Press
three times to scroll to the Shutdown Options menu.
2.
Press
to display
Restart
.
3.
Press
to scroll to
Power Off
.
4.
Press
to select
Power Off
.
5.
Power off system
is displayed. Press
Enter
to power off the system.
Restarting the system
To restore the controller to an operational state, use the following procedure to restart the system.
1.
Press
three times to scroll to the Shutdown Options menu.
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
57
Summary of Contents for 6400/8400
