2.
Press
to display the last fault information.
The first line of the TC display contains the eight-character TC error code and the two-character
IDX (index) code. The IDX is a reference to the location in the TC array that contains this error.
The second line of the TC display identifies the affected parameter with a two-character parameter
number (0–30), the eight-character parameter code affected, and the parameter code number.
3.
Press
to return to the Last Fault menu.
Displaying Detailed Information
The Detail View menu lets you examine detailed fault information stored in the Last Termination Event
Array (LTEA). This array stores information for the last 32 termination events.
Complete the following procedure to display the LTEA information about any of the last 32 termination
events:
1.
When the Fault Management display is active (flashing), press
to select the Detail View menu.
The LTEA selection menu is active (LTEA 0 is displayed).
2.
Press
or
to increment to a specific error.
3.
Press
to observe data about the selected error.
Interpreting fault management information
Each version of HP Command View EVA includes an ASCII text file that defines all the codes that the
authorized service representative can view either on the GUI or on the OCP.
IMPORTANT:
This information is for the exclusive use of the authorized service representative.
The file name identifies the controller model, file type, XCS baselevel id, and XCS version. For example,
the file name
hsv210_event_cr08d3_5020.txt
provides the following information:
•
hsv210_
—The EVA controller model number
•
event_
—The type of information in the file
•
w010605_
—The base level build string (the file creation date).
•
01
—The creation year
•
06
—The creation month
•
05
—The creation date
•
5020
—The XCS version
Table 19
describes types of information available in this file.
Table 20 Controller event text description file
Description
Information type
This hexadecimal code identifies the reported event type.
Event Code
This hexadecimal code specifies the condition that generated the termin-
ation code. It might also define either a system or user initiated corrective
action.
Termination Code (TC)
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
95
Summary of Contents for 6400/8400
