min=0 \ max=4 Serial Port Cable
See Configuration
Note: 1,9
HP 8p Enh Sync/Async Interface A-MSR Mod
JD552A
min=0 \ max=8 Serial Port Cable
See Configuration
Note: 1,9
HP MSR 1-port FT3/CT3 MIM Module
JD628A
min=0 \ max=2 E3/T3 Cable
See Configuration
Note: 1,11
HP 6600 8-port T1 MIM Router Module
JC160A
No Transceivers
See Configuration
Note: 1
HP 6600 8-port Fractional T1 MIM Rtr Mod
JC159A
No Transceivers
See Configuration
Note: 1
HP 6600 4GbE WAN HIM Router Module
JC163A
No Transceivers
See Configuration
Note: 1
HP 6600 8GbE WAN HIM Router Module
JC164A
No Transceivers
See Configuration
Note: 1
HP A6600 8-port 10/100Base-T HIM Module
JC575A
No Transceivers
See Configuration
Note: 1
HP A-MSR 8-p E1/CE1/PRI (75ohm) MIM Mod
JD563A
must select 1 8-port E1 Cable
See Configuration
Note: 1,10
HP MSR 8-port E1/Fractional E1 (75ohm) MIM Module
JF255A
must select 1 8-port E1 Cable
See Configuration
Note: 1,10
HP MSR 1-port FE3/CE3 MIM Module
JD630A
min=0 \ max=2 E3/T3 Cable
See Configuration
Note: 1,11
HP 6600 8-p OC-3/12c POS/GbE SFP HIM Mod
JG673A
min=0 \ max=8 SFP
See Configuration
Note: 1,4,13
Configuration Rules
Note 1
These Modules can install directly to the JC176A - HP A6602 Router
Routers JC177B, JC178B, JC496A Requires JC166B, JC167B, JG357A or JG358A Flex Int
Platform Module to install HIM or MIM modules.
Routers JG353A, JG776A, and JG354A, JG777A Requires the JG357A or JG358A Flex Int
Platform Module to install HIM or MIM modules.
Note 2
The following Transceivers install into this Module: (Use #0D1 if router is CTO) - if
applicable
QuickSpecs
HP 6600 Router Series
Configuration
DA - 13811 Worldwide — Version 21 — February 18, 2014
Page 25