1/4 Turn Hook and Loop Cabling Strap kit 64
1/4 Turn Hook and Loop Cabling Strap kit
About this device
The Hook-and-Loop Cabling Strap Clip kit enables you to add hook-and-loop cabling strap clips to manage
your cable configurations for the HP Advanced Series Racks and Enterprise Series Racks. The cabling straps
attach to the rear cable management bracket.
Kit contents
Item
Quantity
1/4 Turn Hook and Loop Strap 10
PK
10
1/4 Turn Hook and Loop Strap 100
PK
100
This kit might contain extra hardware for your convenience.
Required tools
No tools are required for this procedure.
Installing the hook-and-loop cabling strap clips
1.
Route and secure your cables with the hook-and-loop cabling strap clips.
2.
Turn the hook-and-loop cabling strap clip at a slight angle to align the square nut with the square hole
on the rack.
