5
Removal and replacement procedures
This chapter provides removal and replacement procedures for authorized service provider only
parts.
CAUTION:
Tablet components described in this chapter should only be accessed by an authorized
service provider. Accessing these parts can damage the tablet and void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information
on supported parts for your computer, go to
http://partsurfer.hp.com
, select your country or region,
and then follow the on-screen instructions.
Tablet component replacement procedures
There are as many as 6 screws that must be removed, replaced, and/or loosened when servicing the
tablet. Make special note of each screw size and location during removal and replacement.
Back cover
Description
Spare part number
Back cover (includes Wifi antenna)
785183-001
7-in (1280×720), IPS, 5-point capacitive, TouchScreen; includes display panel cable and
TouchScreen cable display panel assembly
785188-001
Before disassembling the tablet, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
Remove the back cover:
CAUTION:
Before positioning the tablet with the display panel facing down, make sure the work
surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result
in damage to the display panel assembly.
1.
Place the tablet on a flat surface, display panel side down, with the power button and volume
buttons toward you.
Tablet component replacement procedures 11
Summary of Contents for 7 G2 1311
Page 4: ...iv Safety warning notice ...
