2.
Remove the RF cable
(2)
.
Reverse this procedure to install the RF cable.
USB board
Description
Spare part number
USB board (includes cable, USB power connector, and bottom speaker cable)
781982-001
Before removing the USB board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the SIM slot cover (see
SIM slot cover on page 13
).
5.
Remove the back cover (see
Back cover on page 14
).
6.
Remove the middle frame (see
Middle frame on page 16
).
7.
Disconnect the battery cable from the system board (see
Battery on page 19
).
USB board
27
Summary of Contents for 7 VoiceTab
Page 4: ...iv Safety warning notice ...