background image

1   Setting Up the Network Connection

Network Driver Software

14

English

Network Driver Software

The HP Ethernet Family Adapter is based on the AMD PCnet family of network 
adapters. The following drivers are included:

Novell NetWare 3.x,4.x ODI under DOS, OS/2 and Windows for Workgroups.

Microsoft Network Device Interface Specification (NDIS 2.01) compatible 
networks, including:

Microsoft Network Device Interface Specification (NDIS 3.x) compatible 
networks, including:

Microsoft Windows for Workgroups 3.11 

Microsoft Windows NT 3.5

Microsoft Windows NT 3.51

Microsoft Windows 95

Microsoft Network Device Interface Specification (NDIS 4.x) compatible 
networks, including:

Microsoft Windows NT 4.0 

Microsoft Windows 95 OSR2 (OEM Service Release 2)

If your network operating system is not listed above, refer to its manuals to install 
the driver.

NOTE

Due to the evolving nature of the driver software, there may be a README.TXT file 
in driver subdirectories on the LAN Disk. Please check if a README.TXT file exists 
for the driver you are installing and read it. The information contained in this file 
supersedes any information given in this manual.

Artisoft LANtastic

Banyan VINES

DEC Pathworks 5.0

FTP PC/TCP 2.x

IBM LAN Services 4.0

IBM Warp Connect

Sun PC-NFS 5.0

Microsoft LAN Manager 2.x

Windows for Workgroups 3.1 and 3.11

Microsoft Windows 95

Summary of Contents for 733/800/866MHz 1GHz























































































































Reviews: