English
27
2 Installing Novell NetWare Drivers
ODI DOS Client Driver
Starting a NetWare Client
To start a NetWare client, execute the following commands at the DOS prompt:
NOTE
Steps 1 and 2 are only necessary if you did not allow the Netware Client Installation
program to modify your configuration files.
1
Change to the directory where the required files are located (for example
CD
\NOVELL
).
2
Type:
LSL
PCNTNW
IPXODI
and either,
NETX
or
VLM
(If you use VLM.EXE, the CONFIG.SYS file must include LASTDRIVE=Z to work
correctly.)
You will be in the LOGIN directory of the server to which the PC is connected.
3
Type
LOGIN server/user
server
is your server name
user
is your user name on that server
(If you are not sure of your server name, type
SLIST
to display a list of
the available servers.)
NOTE
If you want the PC to be able to log onto the server when it starts, add the commands
listed above to the PC's AUTOEXEC.BAT file. Otherwise create another batch file
and run it when you want the PC to be able to log onto the server.
Summary of Contents for 733/800/866MHz 1GHz
