English
89
5 Configuring for Remote Boot
Setting Up a Novell NetWare 3.x and 4.x Server for Remote Start
NOPROTECT This parameter will override the PROTECT parameter specified in
the BIND command (
refer to page 91
).
PROTECT
This parameter tells RPL.NLM to configure the bootstrap program
so that it will protect itself in the workstation's memory. It does this
by adjusting the Memory Size variable in the BIOS data area
(40:13) to reflect the amount of memory that it uses. Using this
parameter will reduce the amount of memory that the workstation
has available for DOS by about 12 KB.
It is recommended that the PROTECT parameter is
not
used unless
absolutely necessary.
PS=SERVER
This parameter tells the bootstrap program to attach to a NetWare
file server other than the one where RPL.NLM is loaded. “SERVER”
is the name of a NetWare file server that contains the Image file for
the workstation.
REP string1|string2 This parameter allows you to replace
all
occurrences of string1
with string2 in the Disk Image File. The “|” (ASCII 07C hex)
delimiter
is required
to separate the string values.
Use the REP parameter to dynamically reconfigure a Disk Image
File during the RPL process. It is useful for tailoring files such as
AUTOEXEC.BAT or CONFIG.SYS to a specific workstation.
The rules for using REP are as follows (refer to the
Novell NetWare
manuals for more details):
•
The search is case sensitive. The bootstrap program will search
for string1 exactly as it is entered in BOOTCONF.SYS.
•
All occurrences of string1 will be replaced with string2 in the Disk
Image File.
•
string2 must be equal to or shorter than string1.
•
If string2 is shorter than string1, the Disk Image File will be
padded with ASCII blanks when substitution is made.
•
string2 must not contain embedded ASCII blanks. The FIRST
blank that is encountered is interpreted as the end of the string.
Summary of Contents for 733/800/866MHz 1GHz
