English
95
5 Configuring for Remote Boot
Remote Boot on Windows NT 3.5x AS (RPL)
To install Windows for Remoteboot Workstations, refer to the relevant section of
the online installation help.
3
To start the Remoteboot service:
a
In Control Panel, choose the Services icon.
b
Select the Remoteboot service, and start it. You may configure it to start
automatically by selecting the startup button.
4
To install the Bootblock and configurations for the HP Ethernet Family Adapter:
a
Open a DOS box in your NT AS.
b
Insert the LAN Disk in the flexible disk drive. Make this drive the current drive.
c
Change to the
\RPL\NTRPL
directory of your flexible disk drive by typing
cd
\RPL\NTRPL
d
Type
HPIASRPL C:\WINNT35\RPL
assuming
C:\WINNT35\RPL
is the
drive and directory where the Remoteboot service is installed.
e
You have now prepared your server, by copying all the files you need to run the
Remoteboot services from the LAN Disk.
5
Setting up the Remoteboot:
To install other protocols as IPX, or TCP/IP, or to manage your profiles and
workstations, please refer to the Windows NT online installation help.
Summary of Contents for 733/800/866MHz 1GHz
