5 Configuring for Remote Boot
Remote Boot on Windows NT 4.0 Server with PXE and DHCP/TFTP
98
English
Remote Boot on Windows NT 4.0 Server with PXE and
DHCP/TFTP
CAUTION
Make sure your computer supports this protocol.
This protocol will be available on your server only if you installed Intel LanDesk
Configuration Manager or any other server package which supports DHCP/TFTP.
For more information on installing and configuring Intel LanDesk Configuration
Manager refer to the Intel online documentation.
Client Configuration
To remote boot from a DHCP/TFTP server, the client PC should have an
appropriate boot ROM and the boot order in the Setup program should have the
DHCP/TFTP server as the first bootable device.
Summary of Contents for 733/800/866MHz 1GHz
