Front Bezel
NOTE:
Front bezel appearance may vary by model.
1.
Prepare the computer for disassembly (
Preparation for Disassembly on page 35
).
2.
Remove the computer access panel (
Computer Access Panel on page 43
).
3.
Lift up the three tabs on the side of the bezel
(1)
, then rotate the bezel off the chassis
(2)
.
Figure 6-12
Removing the Front Bezel
To install the front bezel, reverse the removal procedure.
44
Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis