manualshive.com logo in svg

HP A-F5000, Installation Manual

The HP A-F5000 user manual provides detailed instructions on disassembling and recycling the product at its end-of-life stage. Download this manual for free from 88.208.23.73:8080, ensuring proper disposal and minimizing environmental impact. Gain a comprehensive understanding of the product's disassembly process and contribute to a sustainable future.

Share
Download
background image

i 

Contents 

Product overview·························································································································································· 1

 

A-F5000 physical architecture·········································································································································1

 

Main processing unit (NSQ1MPUA0)····························································································································2

 

Interface modules ······························································································································································2

 

NSQ1GT8C40·························································································································································2

 

NSQ1GT8P40··························································································································································3

 

NSQ1XP20·······························································································································································3

 

Power supplies···································································································································································3

 

AC-input power supply ············································································································································4

 

DC-input power supply ············································································································································4

 

Fan trays·············································································································································································5

 

Preparing for installation ············································································································································· 6

 

Safety recommendations ··················································································································································6

 

Safety symbols ··························································································································································6

 

General safety recommendations···························································································································6

 

Safety with electricity ···············································································································································6

 

Safety with laser ·······················································································································································6

 

Safety with firewall moving ·····································································································································7

 

Examining the installation site ·········································································································································7

 

Temperature and humidity·······································································································································7

 

Altitude ······································································································································································8

 

Cleanness··································································································································································8

 

Cooling system ·························································································································································8

 

ESD prevention ·························································································································································9

 

EMI·········································································································································································· 10

 

Lightning protection··············································································································································· 10

 

Rack-mounting························································································································································ 11

 

Installation tools······························································································································································ 11

 

Accessories supplied by the firewall···························································································································· 11

 

Checklist before installation ·········································································································································· 12

 

Installing the firewall ··················································································································································14

 

Installation flow ······························································································································································ 15

 

Check before installation··············································································································································· 15

 

Installing the firewall in a 19-inch rack························································································································ 15

 

Installing cage nuts to the rack ···························································································································· 15

 

Installing the cable management brackets·········································································································· 16

 

Installing the mounting brackets to the firewall ·································································································· 17

 

Installing the firewall to the rack·························································································································· 18

 

Grounding the firewall ·················································································································································· 18

 

Installing an MPU··························································································································································· 19

 

Installing an interface module······································································································································· 20

 

Installing a fan tray ························································································································································ 21

 

Installing a CF card························································································································································ 22

 

Installing an air filter (optional)····································································································································· 23

 

Installing a power supply ·············································································································································· 24

 

Connecting a power cord ············································································································································· 25

 

Connecting an AC power cord ··························································································································· 25

 

Connecting a DC power cord······························································································································ 26

 

Summary of Contents for A-F5000


































































































Reviews:

No comments

Related manuals for A-F5000

F5 ARX-2000 Replacement Script preview
ARX-2000
Brand: F5 Pages: 32
F5 Viprion Manual preview
Viprion
Brand: F5 Pages: 74
F5 ARX 6000 Hardware Installation Manual preview
ARX 6000
Brand: F5 Pages: 104
Sonnet Echo Express SE III User Manual preview
Echo Express SE III
Brand: Sonnet Pages: 14
Sonnet Echo Express III-D Thunderbolt 3 Edition User Manual preview
Echo Express III-D Thunderbolt 3 Edition
Brand: Sonnet Pages: 14
Sonnet echo express SE II User Manual preview
echo express SE II
Brand: Sonnet Pages: 16
Sonnet Echo Express SE I User Manual preview
Echo Express SE I
Brand: Sonnet Pages: 16
Goldstar MC-993A Adjustment Instructions Manual preview
MC-993A
Brand: Goldstar Pages: 36
abaco systems 4DSP PCIe490 User Manual preview
4DSP PCIe490
Brand: abaco systems Pages: 9
IBM 3453-C2E Customer Install Manual preview
3453-C2E
Brand: IBM Pages: 44
National Instruments PXI-1025 MegaPAC User Manual preview
PXI-1025 MegaPAC
Brand: National Instruments Pages: 43
National Instruments VXI-1200 User Manual preview
VXI-1200
Brand: National Instruments Pages: 72
Patton electronics ForeFront 6676 User Manual preview
ForeFront 6676
Brand: Patton electronics Pages: 50
National Instruments VXI Series User Manual preview
VXI Series
Brand: National Instruments Pages: 25
National Instruments NI 9144 User Manual preview
NI 9144
Brand: National Instruments Pages: 95
TRENDnet TEG-S3000I - TEG Gigabit Layer 2 Managed Chassis S3000i Switch Quick Installation Manual preview
TEG-S3000I - TEG Gigabit Layer 2 Managed Chassis S3000i Switch
Brand: TRENDnet Pages: 11
Georgia Institute of Technology AutoRally Instructions Manual preview
AutoRally
Brand: Georgia Institute of Technology Pages: 92
Fisher custom electra E-48 Service Manual preview
custom electra E-48
Brand: Fisher Pages: 11

Brands by name

Popular brands

Load more brands