87
Device management
Device management overview
Device management functions enable you to check the operating status and configure the running
parameters of devices.
Configuring the device name
NOTE:
You can configure the device name in the web interface or the comand line interface (CLI).
Configuring the device name in the web interface
The current system name is on the very top of the navigation tree, as shown in
.
Figure 58
Current system name
Select
Device Management
>
Device Basic
>
Device Basic Info
from the navigation tree to enter the page,
as shown in
Figure 59
Device basic information
Configuring the device name in the CLI
A device name identifies a device in a network. If the device name is
Sysname
, the prompt of user view
is <Sysname>.
Follow these steps to configure the device name:
To do…
Use the command…
Remarks
Enter system view
system-view
—