91
Figure 53
Repackaging the switch chassis
3.
Cover the chassis with the packing bag, and then tape the bag to the pallet base.
4.
Install the side panels to the base pallet.
5.
Put the accessories box and mounting bracket box into the wooden carton—at the clearance
between the chassis and the wooden panel.
6.
Cover the foam cushion to the chassis top, and make sure that the surface of the foam cushion
aligns to the upper rims of the wooden carton. Cover the foam cushion in a correct direction;
otherwise, the foam cushion cannot be completely placed in the wooden carton.
7.
Cover the top cap to the wooden carton, and then connect the panels with corro clips on each
seam.
