12
Procedure
Figure 5
Installing the Bridge Adapter with the Expansion Adapter onto the SBC
CAUTION:
When installing the board computer and PMC adapter(s) into a Model 748
industrial system, to properly seat the assembly in the card cage you must
push down slightly on the assembly for the last 2.5 cm (one inch) of travel in
order to compress the EMI gasket on the card cage.
11 Insert the board computer with the attached PMC adapter(s) into the card
cage slots until the assembly seats properly and the front panels are flush
against the card cage.
Front Bezel Screws (4)
Connector
Screws (4)
Bridge Adapter with
Expansion Adapter
GSC Connector
Tabs (4)
