manualshive.com logo in svg

HP A5800 Series, Configuration Manual

The HP A5800 Series Configuration Manual is a comprehensive guide that provides step-by-step instructions for setting up and configuring your A5800 series product. You can easily download this manual for free from our website, 88.208.23.73:8080, to ensure smooth installation and optimal performance of your device.

Share
Download
background image

iii 

Contents 

IRF configuration ·························································································································································· 1

 

IRF overview ······································································································································································ 1

 

Benefits ······································································································································································ 1

 

Application scenario ················································································································································ 2

 

IRF topologies ··························································································································································· 2

 

Basic concepts ··································································································································································· 3

 

Establishment, operation, and maintenance of an IRF virtual device ·········································································· 4

 

Connecting the IRF member switches ····················································································································· 4

 

Topology collection ·················································································································································· 7

 

Master election ························································································································································· 7

 

IRF virtual device management and maintenance ································································································ 7

 

IRF multi-active detection ·········································································································································· 9

 

IRF virtual device configuration task list ······················································································································· 10

 

Configuring an IRF virtual device ································································································································· 11

 

Specifying a domain ID for an IRF virtual device ······························································································ 11

 

Changing the IRF member ID of a switch ··········································································································· 13

 

Configuring IRF ports ············································································································································ 13

 

Specifying a priority for a member switch ········································································································· 15

 

Configuring a description for a member switch ································································································ 15

 

Configuring load sharing criteria for IRF links ··································································································· 15

 

Specifying the preservation time of bridge MAC address ··············································································· 17

 

Enabling automatic boot file updating ················································································································ 18

 

Setting the IRF link down report delay ················································································································ 19

 

Configuring MAD detection ·········································································································································· 19

 

Configuring LACP MAD ······································································································································· 20

 

Configuring BFD MAD ·········································································································································· 22

 

Accessing an IRF virtual device ···································································································································· 28

 

Accessing the master ············································································································································ 28

 

Accessing a slave switch ······································································································································ 29

 

Displaying and maintaining an IRF virtual device ······································································································ 29

 

IRF virtual device configuration examples ··················································································································· 30

 

LACP MAD detection-enabled IRF configuration example ················································································ 30

 

BFD MAD detection-enabled IRF configuration example ·················································································· 32

 

ARP MAD detection-enabled IRF configuration example ·················································································· 35

 

Support and other resources ····································································································································· 38

 

Contacting HP ································································································································································ 38

 

Subscription service ·············································································································································· 38

 

Related information ························································································································································ 38

 

Documents ······························································································································································ 38

 

Websites ································································································································································ 38

 

Conventions ···································································································································································· 39

 

Index ··········································································································································································· 

91H

41

 

 

Summary of Contents for A5800 Series














































Reviews:

No comments

Related manuals for A5800 Series

D-Link DUB-1340 Datasheet preview
DUB-1340
Brand: D-Link Pages: 2
D-Link DKVM-4U Specifications preview
DKVM-4U
Brand: D-Link Pages: 2
D-Link DKVM-16 - KVM Switch Manual preview
DKVM-16 - KVM Switch
Brand: D-Link Pages: 24
D-Link Dis-200G Series Web Ui Reference Manual preview
Dis-200G Series
Brand: D-Link Pages: 161
D-Link Dis-200G Series Quick Installation Manual preview
Dis-200G Series
Brand: D-Link Pages: 16
D-Link Dis-200G Series Hw Installation Manual preview
Dis-200G Series
Brand: D-Link Pages: 47
D-Link DGS-3130-30PS Quick Installation Manual preview
DGS-3130-30PS
Brand: D-Link Pages: 25
D-Link DGS-3100 SERIES Hardware Installation Manual preview
DGS-3100 SERIES
Brand: D-Link Pages: 54
D-Link DGS-3100 SERIES Cli Manual preview
DGS-3100 SERIES
Brand: D-Link Pages: 220
D-Link DGS-3000-28SC Quick Installation Manual preview
DGS-3000-28SC
Brand: D-Link Pages: 24
D-Link DGS-1248T - Switch Manual preview
DGS-1248T - Switch
Brand: D-Link Pages: 52
D-Link DGS-1216T - Switch Getting Started Manual preview
DGS-1216T - Switch
Brand: D-Link Pages: 42
D-Link DGS-1216T - Switch Quick Installation Guid preview
DGS-1216T - Switch
Brand: D-Link Pages: 10
D-Link DGS-1010MP Installation Manual preview
DGS-1010MP
Brand: D-Link Pages: 8
D-Link DES-3350SR Command Line Interface Reference Manual preview
DES-3350SR
Brand: D-Link Pages: 379
D-Link DES-3326SR Manual preview
DES-3326SR
Brand: D-Link Pages: 240
D-Link DES-3350SR User Manual preview
DES-3350SR
Brand: D-Link Pages: 188
D-Link DES-3326S - Switch - Stackable User Manual preview
DES-3326S - Switch - Stackable
Brand: D-Link Pages: 349

Brands by name

Popular brands

Load more brands