Using QuickLoop Zones
49
Zoning Version 3.1.x/4.1.x User Guide
To Specify by AL_PA
Specify the QuickLoop zone name, in quotes, with the QuickLoop name and
desired AL_PAs, in quotes. All AL_PAs must be associated with a QuickLoop
name. For example:
Zonecreate “QLZoneName”, “qloop1[01,02,04,e0,e1,e2]”
To specify a Combination of looplet and AL_PA
Example:
Zonecreate “QLZoneName”, “0,2; 0,3; qloop1[ca,cb,e1,e2]”
Define a QuickLoop Zone Configuration
To define a QuickLoop zone configuration, assign a zone configuration name and
specify the QuickLoop zones to be included, by zone name. The QuickLoop
names of the QuickLoop zones must also be included in the zone configuration.
An example of a QuickLoop zone configuration is:
cfgname “cfgname”, “QLZoneName”
For example:
cfgname “QLconfig_1”, “QLZoneName”, “qloop1[01,02,04,e0,e1,e2]”
cfgenable “QLconfig_1”
Summary of Contents for A7340A - Surestore FC 1Gb/2Gb Switch 16B
Page 12: ...About this Guide 12 Zoning Version 3 1 x 4 1 x User Guide ...
Page 18: ...Introducing Zoning 18 Zoning Version 3 1 x 4 1 x User Guide ...
Page 68: ...Zoning Concepts and Guidelines 68 Zoning Version 3 1 x 4 1 x User Guide ...
Page 70: ...Using Zoning to Administer Security 70 Zoning Version 3 1 x 4 1 x User Guide ...
