background image

1 Thin client operation

Routine thin client care

Use the following information to properly care for your thin client:

Never operate the thin client with the outside panel removed.

Keep the thin client away from excessive moisture, direct sunlight, and extreme heat and
cold. For information about recommended temperature and humidity ranges for the thin
client, see product specifications.

Keep liquids away from the thin client and keyboard.

Turn off the thin client and wipe the exterior with a soft, damp cloth as needed. Using
cleaning products may discolor or damage the finish.

Configuring the AB300X as an RS-232 Console

The following section describes how to create a terminal emulator session, how to create an auto
log on user account, and how to configure the terminal emulator session to automatically launch
when the thin client is rebooted for any reason.

NOTE:

There is currently no method of saving these configuration parameters to a file that can

be retrieved at a later time. Therefore, it is imperative that all configuration parameters are
recorded for future use.

Creating a Terminal Emulator Session

To create a terminal emulator session, perform the following steps:

1.

Connect the HP Thin Client unit using the supplied DB9 Serial Cable (5184–1894) to the
serial port of the HP 9000 server.

2.

Select

Start

Programs

Connection Administrator

.

3.

Press the

Add

button.

4.

Choose

Terminal Emulation

.

5.

From the HP Connection Window, run the new terminal Emulation wizard.

6.

Create a

Connection Name

for this section.

NOTE:

Please note that the console solution supports two of the available teemCE

emulations: VT 100 and HP 700–92/96 emulation mode, click the

Emulation

dropdown list

to select

HP700–92/96

emulation mode. Click the

Terminal ID

dropdown list to select

70092

and click

Next

.

7.

If using the HP700–92/96 emulation mode, click the

Emulation

dropdown list to select

HP700–92/96

emulation mode. Click the

Terminal ID

dropdown list to select

70092

and

click

Next

.

Routine thin client care

7

Summary of Contents for AB300 - Server Console Solution














Reviews: