Editing the Nvram Script
You can create an nvram script to include any commands you want the system to execute at
power-up.
You create and edit the nvram script using the SRM
edit
command. With
edit
, lines may be
added, overwritten, or deleted.
The syntax is:
edit
file
file
is the name of the file to be edited.
The editing commands are:
help
Displays the brief help file.
list
Lists the current file prefixed with line numbers.
renumber
Renumbers the lines of the file in increments of 10.
exit
Leaves the editor and closes the file, saving all changes.
quit
Leaves the editor and closes the file without saving changes.
nn
Deletes line number
nn
.
nn text
Adds or overwrites line number
nn
with
text
.
CAUTION:
Use caution when editing the nvram script. It is possible to disable the
system by including an inappropriate command. For example, if you include
the
init
command in the script, the system will go into an endless loop.
To correct this error, issue the RMC
halt in
command, then power up or
reset the system. When the >>> prompt is displayed, edit the nvram script to
remove the illegal command.
5-30
hp AlphaServer TS15 Owner's Guide
