Field Meaning
Alert Pending
Alert pending status:
YES = Alert condition is awaiting delivery.
NO = No alert condition is awaiting delivery.
Latest Alert
Text string that describes the last alert generated on the system.
Init String
Initialization string that was set for modem.
Dial String
Dial string that is sent to modem when an alert occurs
Alert String
Identification string to be sent to pager when an alert occurs.
Usually set to phone number of alerting system.
User String
System notes supplied by the user.
COM1
State of the system’s COM1 settings:
COM1_BAUD:
1800, 2000, 2400, 3600, 4800, 7200, 9600, 19200,
38400,
57600
COM1_FLOW:
NONE, SOFTWARE, HARDWARE, BOTH
COM1_MODE:
THROUGH, SNOOP, SOFT_BYPASS, FIRM_BYPASS
COM1_MODEM:
ENABLED,
DISABLED
COM1_RMC:
ENABLED,
DISABLED
Logout Timer
The amount of time before the RMC terminates an inactive
modem connection (in minutes).
Voltage Status
Current state of system power:
OK = All power is good
FAIL = One or more of the system voltages has crossed
fatal
threshold
Thermal Status
System thermal status:
OK = Thermal status is good
WARNING = Thermal warning threshold has been crossed
(fatal threshold has not been crossed)
FAIL = Thermal fatal threshold has been crossed
Using the Remote Management Console
6-17