help or ? command-word
Issuing the command
help
or
?
followed by the first word of another command provides
additional information on all of the commands that start with the supplied word.
log
The
log
command prints out a brief summary of the last 10 system events that have been
logged.
log number
Issuing the
log
command followed by a number (0-9) provides detailed information about
the selected system event (0=most recent event).
poe
The
poe
command displays the latest power-on error (if any).
power off
The
power off
command performs the same function as releasing the on/off button on the
OCP; it turns the system power off.
power on
The
power on
command performs the same function as pressing the on/off button on the
OCP; it turns the system power on.
The system cannot be powered on with this command if the OCP power button is in the off
position.
quit
The
quit
command exits the RMC and returns the terminal to external control.
reset
The
reset
command restarts the system. It performs the same function as pressing the reset
button on the OCP. (Jumper J22 pins 13-14 must be inserted for the halt/reset button to
operate as a reset button.)
rmcreset
The
rmcreset
command resets the RMC controller without resetting the remainder of the
system.
Using the Remote Management Console
6-41
