3.
To update the TIG enter
update tig
For example:
UPD> update tig
Confirm update on:
tig [Y/(N)]y
WARNING: updates may take several minutes to complete for each
device.
DO NOT ABORT!
tig Updating to 1.11... Verifying 1.11... PASSED.
UPD>
2.7.3
Updating from the CD-ROM
You can update the system firmware from CD-ROM.
1.
At the SRM console prompt, enter the
show device
command to determine the drive
name of the CD-ROM drive.
2.
Load the Alpha Systems Firmware Update CD into the drive.
3.
Boot the system from the CD, using the drive name determined in step 1 (for example,
dqa0).
>>> boot dqa0
4.
Enter the
update
command at the UPD> prompt.
5.
When the update is complete, exit from the Firmware Update Utility.
UPD> exit
2-26
hp AlphaServer TS15 Owner's Guide