4.3
Replacing the Disk in Center Internal Storage Bay
The center internal storage bay provides a disk drive as optional storage. Refer to the
following figures and procedures when replacing this disk drive.
Figure 4–4 Accessing the Center Internal Storage Bay
MR0629
4
3
4
2
1
2
Removing the Center Internal Storage Bay
4.
Shut down the system and remove the top cover as explained in Section 4.2.
5.
As shown in the preceding figure, pull the two spring-loaded pull pins
o
at the rear of
the storage bay
n
and slide the unit toward the back of the enclosure.
6.
Lift the storage bay from the enclosure and turn it over.
Installing and Configuring Options
4-7