Navigating and selecting in Setup Utility (BIOS)
To navigate and select in Setup Utility (BIOS), follow these steps:
1.
Turn on or restart the computer, and then press
esc
while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
●
To select a menu or a menu item, use the tab key and the keyboard arrow keys and then
press
enter
.
●
To scroll up and down, use the up arrow key or the down arrow key.
●
To close open dialog boxes and return to the main Setup Utility (BIOS) screen, press
esc
,
and then follow the on-screen instructions.
2.
Press
f10
to enter Setup Utility (BIOS).
To exit Setup Utility (BIOS) menus, choose one of the following methods:
●
To exit Setup Utility (BIOS) menus without saving your changes, press the
esc
key, and then
follow the on-screen instructions.
– or –
Use the arrow keys to select
Exit
>
Exit Discarding Changes
, and then press
enter
.
– or –
●
To save your changes and exit Setup Utility (BIOS) menus, press
f10
, and then follow the on-
screen instructions.
– or –
Use the arrow keys to select
Exit
>
Exit Saving Changes
, and then press
enter
.
Your changes go into effect when the computer restarts.
Displaying system information
1.
Start Setup Utility (BIOS).
2.
Select the
Main
menu. System information such as the system time and date, and identification
information about the computer is displayed.
3.
To exit Setup Utility (BIOS) without changing any settings, use the arrow keys to select
Exit
>
Exit Discarding Changes
, and then press
enter
.
Restoring factory settings in Setup Utility (BIOS)
NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Setup Utility (BIOS) to the values that were set at the factory, follow these
steps:
1.
Turn on or restart the computer, and then press
esc
while the “Press the ESC key for Startup
Menu” message is displayed at the bottom of the screen.
2.
Press
f10
to enter Setup Utility (BIOS).
Using Setup Utility (BIOS)
59
