Chapter 2
Unpacking and Installing the hp Carrier Grade Blade Server bh3710
Installing the bh3710 Blade Server in a Rack
2-2
Step 1.
Unpack the blade server from its shipping container.
Step 2.
Compare the contents with the packing list to ensure that all required components have been
received, as listed in Table 2-1.
Step 3.
Use two or more people, or a mechanical device, to move the blade server to the installation site.
Step 4.
Prepare the rack for mounting the blade server chassis.
NOTE
Quantity depends on ordered configuration.
Installing the bh3710 Blade Server in a Rack
The racking kit enables the installation of the bh3710 chassis into a rack. Rack kit installation
documentation is shipped with each server inside the rack kit box. Racking information may also be found at
the Web site: http://www.hp.com/racksolutions.
Table 2-1
Blade Server Components
Qty
Part No.
Exchange
Part No.
Component
1
A6715-62001
A6715-69003
6 EIA unit blade server chassis with backplane and
N+1 fan tray assembly
2
A6790-62004
A6790-69004
DC power supply
2
A6780-60001
A6780-69001
Fibre channel (FC) and LAN RTM blade
1-4
5065-7804
A6783-69001
18GB fibre channel disk
1-2
A6711-62001
A6711-69001
FC disk carriers
2 to 4
A6709-60001
A6709-69001
256 MB DIMM
1
A6708-62001
A6708-69001
bp2200 Blade (2 slot) (front load only)
1
A6712-60001
A6712-69001
Management blade
0 to 2
A6707-00014
N/A
DIMM filler (for bp2200 server blade)
1
A6715-70001
N/A
Kit, spare slot blockers (2 front, 2 rear)
2
A6715-63001
N/A
DC external power input cable
Summary of Contents for BH BH3710
