The user name must begin with a letter.
A maximum of 25 users can be created
in addition to the reserve accounts.
NOTE:
“Administrator,”
“switcha,”switchb,” and “all” are reserved
names and cannot be used. This
restriction is not case-sensitive.
Password
3-8 characters including all printable
characters
User’s password.
Confirm Password
3-8 characters including all printable
characters
User’s password.
Account Type
Radio buttons (Administrator and User)
Determines if the user has enclosure
administrator rights.
Account Status
Radio buttons (Enabled and Disabled)
Determines if the user’s account is
enabled.
Full Name (optional)
1-20 characters
Accepts only alphanumeric, dash,
underscore, and space characters
Full name of user.
Contact Information (optional)
1-20 characters
Accepts only alphanumeric, dash,
underscore, and space characters
Optional user contact information.
Group Names
All groups are listed
A list of all possible groups.
Group Membership
x number of groups (all groups in which
the user has membership)
A list of all groups of which the user is a
member.
Add User [View]>>>
Adds the user to the selected groups in
the
Group Names
text box with View
rights for group members
These groups appear in the
Group
Membership
text box. The user loses
View/Modify rights if they previously had
them.
Add User [View/Modify]>>>
Adds the user to the selected groups in
the
Group Names
text box with View/
Modify rights for group administrators or
view rights for group members.
<<<
Removes the user from the selected
groups in the
Group Membership
text
box.
Add Group
NOTE:
Only enclosure administrators have access to this area of the Integrated Administrator.
The Add Group screen (shown below) enables an enclosure administrator to create a group profile,
including user and blade PC bays assignments.
Table 4-19
Add User Field Descriptions (continued)
ENWW
Administration Tab
41
