<user name>
Group membership is not detected in case of enclosure
administrator rights are removed at a later time.
The <user name> is case-
sensitive.
ASSIGN BAY
[ALL | <bay number> {[ , | - ]
<bay number>}] <group
name>
Assigns one or more bays to a group.
If a bay is already assigned to a group, it must first be
unassigned before executing this command.
Only enclosure administrators
may execute this command.
The <group name> is case-
sensitive.
ASSIGNS USER
<user name>
<group name>
{[VIEW | MODIFY]}
Assigns a user to a group with View rights (for group members)
or View/Modify rights (for group administrators)
If View or View/Modify is not specified, View is chosen by
default.
Only enclosure administrators
may execute this command.
The <user name> is case-
sensitive.
DISABLE USER
<user name>
Disables a user account.
The user is immediately logged out of the system and
prevented from log in until the account us enabled.
Only enclosure administrators
may execute this command.
The <user name> is case-
sensitive. The administrator
account cannot be disabled.
ENABLE USER
<user name>
Enables a user account that was previously disabled by the
DISABLE USER command
Only enclosure administrators
may execute this command.
The <user name> is case-
sensitive.
REMOVE GROUP
[ ALL | <group name> ]
Removes a group and automatically unassigns all bays within
the group.
Only enclosure administrators
may execute this command.
The <group name> is case-
sensitive.
REMOVE USER
[ALL | <user name>]
Removes a user from the system.
If
ALL
is specified, the command is run for all users except the
default system accounts.
Only enclosure administrators
may execute this command.
The <user name> is case-
sensitive.
NOTE:
Administrator,
“switcha,” and “switchb,”
cannot be removed.
SET GROUP
{DESCRIPTION} <group
name> <description>
Sets a group’s description.
Only enclosure administrators
may execute this command.
The <description> must be
1-20 characters long and can
include alphanumeric, dash,
and underscore characters.
The default group description
is blank. If spaces are part of
the contact information,
enclose the information in
quotes.
SET PASSWORD
{<password>}
Sets the password of the user currently logged into the
Integrated Administrator. If a password is not given on the
command line, the user is prompted for one.
NOTE:
This command is not valid in SCRIPT MODE if
password is not specified.
The <password> must be 3-8
characters long and can
include all printable
characters.
Table 5-3
User Account Commands (continued)
ENWW
Operating the Command Line Interface
53
