Installation 47
IMPORTANT:
If the mezzanine card is not installed properly or the interconnect module
installation does not coincide with the mezzanine card installation, the ports on the interconnect
module will not function.
NOTE:
For more information on how and where to install mezzanine cards, see the
server-specific user guide.
To install an interconnect module:
1.
Remove the interconnect blank, if applicable.
2.
If you are installing a double-wide interconnect module, remove the interconnect bay dividers
("
Removing interconnect bay dividers
" on page
55
).
3.
Install the interconnect module, and close the release lever.