11
To Set Up the Interface Pod
To Manually Configure the Interface Pod
•
Note
See the
UNI Signaling Test Application’s Help
for information
on configuring the 25.6 Mb/s interface pod from the B-ISDN UNI
Signaling Test Application.
When the configuration is complete, the analyzer updates all relevant
screens and windows to reflect the new configuration parameters.
1
From the Configure
menu, select the
appropriate port;
then select Set Up.
Click Auto to set the
parameters to the default
settings. A message
warns you that the
reconfiguration will cause
some measurements and
data to be lost and asks if
you want to continue.
Click OK.
2
Click the ATM25 tab.
3
Select the parameters
you require.
4
Click to set the
configuration
or
