xii
Brocade Network Advisor SMI Agent Developer’s Guide
53-1002169-01
•
If you cannot use the licenseIdShow command because the switch is inoperable, you can
get the WWN from the same place as the serial number, except for the Brocade DCX. For
the Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo
plate at the top of the non-port side of the chassis.
Brocade Network Advisor SMI Agent support
Report any problems or issues in using the Brocade Network Advisor SMI Agent to the following
e-mail address:
support@brocade.com
When contacting support at Brocade, provide the following:
•
Brocade Network Advisor supportSave. Refer to the
Brocade Network Advisor User Manual
for
the steps involved in running the supportSave command.
•
Steps followed to produce the problem
•
Error messages received
•
Sample code exhibiting problem (if possible)
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
documentation@brocade.com
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
