HP Brocade BladeSystem 4/12 User Manual Download

Page: 143 / 662

DCFM Professional User Manual

111

53-1001773-01

Customizing the main window

2. Choose from the following options:

•

Select the check box to display a column.
OR
Select the column name and click Show.

•

Clear the check box to hide a column.
OR
Select the column name and click Hide.

•

Click Select All to select all check boxes.

•

Click Deselect All to clear all check boxes.

•

Click Restore Defaults to restore the Product List to the original settings.

3. Click OK.

Changing the order of columns

To change the order in which columns display, choose from one of the following options.

Rearrange columns in a table by dragging and dropping the column to a new location.

1. Right-click anywhere in the table and select Customize or Table > Customize.

The Customize Columns dialog box displays.

2. Highlight the name of the column you want to move and use Move Up and Move Down to move

it to a new location.

3. Click OK.

Resizing the columns

You can resize a single column or all columns in the table.

To resize a single column, right-click the column header and select Size Column to Fit or Table >
Size Column to Fit.

To resize all columns in the table, right-click anywhere in the table and select Size All Columns to Fit
or Table > Size All Columns to Fit.

Sorting table information

To sort the product list by a single column, click the column header.

To reverse the sort order, click the column header again.

To sort the product list by multiple columns, complete the following steps.

1. Click the primary column header.

2. Press CTRL and click a secondary column header.

Summary of Contents for Brocade BladeSystem 4/12























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands

HP Brocade BladeSystem 4/12, User Manual

Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands