manualshive.com logo in svg

HP Brocade BladeSystem 4/12, User Manual

Introducing the HP Brocade BladeSystem 4/12 - a cutting-edge networking solution for seamless blade server integration. Simplify your operations with this high-performance product, fully equipped to meet your networking needs. Enhance your user experience by downloading the comprehensive User Manual for free from 88.208.23.73:8080, guiding you through setup and configuration effortlessly.

Share
Download
background image

DCFM Professional User Manual

xv

53-1001773-01

 

Chapter 13

Fibre Channel over Ethernet

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

FCoE overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

DCB exchange protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

Enhanced Ethernet features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

Enhanced transmission selection. . . . . . . . . . . . . . . . . . . . . . .284
Priority-based flow control. . . . . . . . . . . . . . . . . . . . . . . . . . . . .284
Ethernet jumbo frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

FCoE protocols supported  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

Ethernet link layer protocols supported . . . . . . . . . . . . . . . . . .285
FCoE protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

FCoE Licensing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286

Save running to startup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286

Copying switch configurations to selected switches . . . . . . . .286

CEE configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287

Opening the CEE Configuration dialog box. . . . . . . . . . . . . . . .288
CEE configuration tasks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289
Minimum CEE configuration for FCoE traffic . . . . . . . . . . . . . .289

Switch policies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

CEE map and Traffic Class map . . . . . . . . . . . . . . . . . . . . . . . .294
LLDP profiles  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294
Access control lists  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294
Spanning Tree Protocol policy . . . . . . . . . . . . . . . . . . . . . . . . . .295
802.1x policy  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295

Link aggregation groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296

Adding a LAG  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296
Editing a CEE switch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299
Editing a CEE port  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300
Editing a LAG  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301
Enabling a CEE port or LAG . . . . . . . . . . . . . . . . . . . . . . . . . . . .303
Deleting a LAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .304

CEE Performance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305

Real Time Performance Graph . . . . . . . . . . . . . . . . . . . . . . . . .305
Historical Performance Graph. . . . . . . . . . . . . . . . . . . . . . . . . .306

QoS configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .307

Enhanced Transmission Selection . . . . . . . . . . . . . . . . . . . . . .307
Priority-based flow control. . . . . . . . . . . . . . . . . . . . . . . . . . . . .307
Creating a CEE map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308
Editing a CEE map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .310
Deleting a CEE map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311
Assigning a CEE map to a port or link aggregation group . . . .312
Creating a traffic class map  . . . . . . . . . . . . . . . . . . . . . . . . . . .313
Editing a traffic class map. . . . . . . . . . . . . . . . . . . . . . . . . . . . .314
Deleting a traffic class map  . . . . . . . . . . . . . . . . . . . . . . . . . . .314
Assigning a traffic class map to a port or
link aggregation group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315

Summary of Contents for Brocade BladeSystem 4/12























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Brocade BladeSystem 4/12

Xerox DocuPrint 115 System Manual preview
DocuPrint 115
Brand: Xerox Pages: 100
McAfee VIRUSSCAN HOME EDITION 7.0 Manual preview
VIRUSSCAN HOME EDITION 7.0
Brand: McAfee Pages: 56
MACROMEDIA COLDFUSION 5 - INSTALING AND CONFIGURING... Manual preview
COLDFUSION 5 - INSTALING AND CONFIGURING...
Brand: MACROMEDIA Pages: 160
Red Hat APPLICATION STACK 2.4 RELEASE Release Note preview
APPLICATION STACK 2.4 RELEASE
Brand: Red Hat Pages: 22
I.R.I.S. IRISPowerscan 9.5 User Manual preview
IRISPowerscan 9.5
Brand: I.R.I.S. Pages: 182
AirLive AIRTV-1000U User Manual preview
AIRTV-1000U
Brand: AirLive Pages: 19
GRASS VALLEY AURORA BROWSE 7 Datasheet preview
AURORA BROWSE 7
Brand: GRASS VALLEY Pages: 4
FieldServer FS-8700-23 Driver Manual preview
FS-8700-23
Brand: FieldServer Pages: 11
FieldServer FS-8700-101 Driver Manual preview
FS-8700-101
Brand: FieldServer Pages: 23
FieldServer FS-8707-06 Driver Manual preview
FS-8707-06
Brand: FieldServer Pages: 15
MACROMEDIA CONTRIBUTE 3 - DEPLOYING AND PUBLISHING... Manual preview
CONTRIBUTE 3 - DEPLOYING AND PUBLISHING...
Brand: MACROMEDIA Pages: 66
Oracle Retail Data Warehouse Installation Manual preview
Retail Data Warehouse
Brand: Oracle Pages: 35
Oracle Oracle7 Server 7.3 Getting Started Manual preview
Oracle7 Server 7.3
Brand: Oracle Pages: 202
TANDBERG GW Dataport Command Interface D13202 User Manual preview
GW Dataport Command Interface D13202
Brand: TANDBERG Pages: 32
Juniper NETWORK AND SECURITY MANAGER Manual preview
NETWORK AND SECURITY MANAGER
Brand: Juniper Pages: 340
Canon Elura 60 - Elura 60 MiniDV Camcorder Instruction Manual preview
Elura 60 - Elura 60 MiniDV Camcorder
Brand: Canon Pages: 89
Adobe 65009626 - Soundbooth CS4 - PC Using Manual preview
65009626 - Soundbooth CS4 - PC
Brand: Adobe Pages: 102
Dell PowerVault ML6000 Maintenance Manual preview
PowerVault ML6000
Brand: Dell Pages: 494

Brands by name

Popular brands

Load more brands