HP Brocade BladeSystem 4/12 User Manual Download

Page: 345 / 662

DCFM Professional User Manual

313

53-1001773-01

QoS configuration

Creating a traffic class map

1. Select Configure > Switch > CEE from the menu bar.

The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.

2. Select a switch, and click Edit.

3. Click the QoS tab on the Edit Switch dialog box.

The QoS dialog box displays.

4. Select Traffic Class from the Map Type list.

5. Name the Traffic Class map.

6. Click the Traffic Class cell in a CoS row and directly enter a value from 0-7. You can leave the

cell empty to indicate zero (0).

7. Click the right arrow button to add the map to the Traffic Class Maps table.

If the name of the Traffic Class map already exists, an overwrite warning message displays.
Click Yes to overwrite the existing Traffic Class map.

8. Click OK if the Traffic Class map does not already exist.

The CEE Confirmation and Status dialog box displays.

9. Review the changes carefully before you accept them.

10. Click Start to apply the changes, or click Close to abort the operation.

Summary of Contents for Brocade BladeSystem 4/12























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands

HP Brocade BladeSystem 4/12, User Manual

Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands