HP Brocade BladeSystem 4/12 User Manual Download | Manualshive

Page: 481 / 662

background image

DCFM Professional User Manual

449

53-1001773-01

Zoning configuration

15

2. Click the Zone DB tab if that tab is not automatically displayed.

3. Select an FC fabric from the Zoning Scope list.

This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.

4. Select one or more zones to which you want to add members in the Zones list. (Press SHIFT or

CTRL and click each zone name to select more than one zone.)

5. Click New Member.

The Add Zone Member dialog box displays.

6. Select Alias from the Member Type list.

7. Add the new member by alias name by completing the following steps.

a. Select the Existing Alias option.

b. Select an alias from the list.

OR

Create a new alias by completing the following steps.

a. Select the New Alias option.

b. Enter a name in the New Alias field.

c. Assign the alias by choosing one of the following options:

•

Select the WWN option and enter the WWN in the field.
If you enter a WWN that has been used by a discovered device, a message displays
informing you of this and instructing you to enter a port WWN. Click OK to close the
message box and enter an appropriate WWN.

•

Select the Domain, Port Index (decimal) option and enter domain or port values in the
fields.

•

Select the Domain, Port Index (hex) option and enter domain or port values in the
fields.

8. Click OK to save your changes and close the Add Zone Member dialog box.

OR

Click Apply to save your changes and keep the Add Zone Member dialog box open so you can
add more new members. Repeat steps 5, 6, and 7 as many times as needed, and proceed to
step 8 when appropriate.

9. For offline zone databases only, complete the following steps to save the zone configuration

into the switch from the offline zone database:

a. Select Save to Switch from the Zone DB Operation list.

b. Click Yes on the confirmation message.

The selected zone database is saved to the fabric without enabling a specific zone
configuration.

10. Click OK or Apply to save your changes.

A message displays informing you that any zones or zone configurations you have changed will
be saved in the zone database, and warning you to make sure no other user is making
changes to the same areas.

«
...
479
480
481
482
483
...
»

Summary of Contents for Brocade BladeSystem 4/12























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Brocade BladeSystem 4/12

DATA SYNCHRONIZER

Brand: Novell Pages: 50

Brand: TRENDnet Pages: 21

Brand: Vitek Pages: 1

Unified Messenger

Brand: Avaya Pages: 35

APPLICATION STACK 2.2 RELEASE

Brand: Red Hat Pages: 22

Brand: Sierra Wireless Pages: 11

Brand: Symantec Pages: 105

Norton Personal Firewall 2003

Brand: Symantec Pages: 151

SERVICEDESK 7.0 MR2

Brand: Symantec Pages: 188

Brand: GRASS VALLEY Pages: 790

Brand: TYAN Pages: 41

15606-011408-9005 - MAP R6.3 NAMED-10U PK

Brand: Autodesk Pages: 332

Brand: Oce Pages: 22

Brand: ICP Pages: 8

Abbey Road RS56

Brand: Waves Pages: 13

Brand: DeLorme Pages: 280

Brand: Colorbyte Software Pages: 11

Brand: Lenovo Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands