HP Brocade BladeSystem 4/12 User Manual Download

Page: 528 / 662

496

DCFM Professional User Manual

53-1001773-01

Main menus

Manage View. Select to set up the Management
application view.

Create View. Select to create a new view.

Display View. Select to display by View All or by a view you
create.

Levels. Select to display by All Levels, Products and Ports,
Product Only, or Ports Only.

Copy View. Select to copy a view.

Delete View. Select to delete a view.

Edit View. Select to edit a view.

Zoom. Select to configure the zoom percentage.

Show. Select to determine what products display.

Fabrics Only. Select to display only fabrics.

Groups Only. Select to display only groups.

All Products. Select to display all products.

All Ports. Select to display all ports.

Enable Flyover Display/Device Tips. Select to enable
flyover display.

Show Ports. Select to show utilized ports on the selected
device.

Connected End Devices. Select to show or hide all
connected end devices.

Include Virtual Devices check box. Select to include
virtual devices.

Hide All. Select to hide all connected end devices.

Show All. Select to show all connected end devices.

Custom. Select to set a custom display for all connected
end devices.

MyCustomList

. Lists all custom views.

Map Display. Select to customize a group's layout to make
it easier to view the SAN and manage its devices.

Domain ID/Port #. Select to set the display domain IDs
and port numbers in decimal or hex format.

Decimal. Select to display all domain IDs and port
numbers in decimal format.

Hex. Select to display all domain IDs in hex format.

Product Label. Select to configure which product labels
display.

Name. Select to display the product name as the product
label.

Node WWN. Select to display the node name as the
product label.

Command

Command Options

Summary of Contents for Brocade BladeSystem 4/12























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands

HP Brocade BladeSystem 4/12, User Manual

Search results

Summary of Contents for Brocade BladeSystem 4/12

Reviews:

Related manuals for Brocade BladeSystem 4/12

Brands by name

Popular brands