HP Part Number 5990-3463
3
Installing the Plastic Rails (Models DAT 24i and DAT 40i)
The plastic drive rails are secured to the drive by spring tension.
To install the plastic drive rails:
Table 2.
HP Surestore Tape Drives for the HP Server tc4100
Drive
Part No.
Size
Supported Location
Comments
DAT 24i
C1555D
Half Height
R1, R2, P2, P3
Use the plastic drive rails when installing.
DAT 40i
C5686A
Half Height
R1, R2, P2, P3
Use the plastic drive rails when installing.
DAT 40x6i
C5716A
Full Height
R1 and R2, P2 and P3
(Two HH slots are
required)
Use the metal drive rails when installing on
the server.
DAT 24X6i
C5677B
Full Height
R1 and R2, P2 and P3
(Two HH slots are
required)
Use the metal drive rails when installing on
the server.
Ultrium 230i
C7400A
Full Height
R1 and R2, P2 and P3
(Two HH slots are
required)
Use the metal drive rails when installing on
the server.
DLT VS80i
C7504A
Half Height
R1, R2, P2, P3
If this drive is installed in position P2 or P3,
it is necessary to remove the power
protection bracket of the server.
See
“Clearance Considerations (Model
C7504A or C7420A)” on page 5
Use the metal drive rails when installing on
the server.
Ultrium 215i
C7420A
Half Height
R1, R2, P2, P3
If this drive is installed in position P2 or P3,
it is necessary to remove the power
protection bracket of the server.
See
“Clearance Considerations (Model
C7504A or C7420A)” on page 5
Use the metal drive rails when installing on
the server.
Figure 3. HP Surestore Supported Locations for the HP Server tc4100
0
1
1
1
Rack Mount
Pedestal
P1 CD-ROM
P2 Location
P3 Location
R3 CD-ROM
R2 Location
R1 Location
