3. Slide the screwdriver inside the end cap to the place as
indicated and gently pry again until the end cap comes free.
4. Remove the end cap.
HP PRO M452 / MFP 477 (CF410/11/12/13 A/X-HP 410 SERIES) TONER CARTRIDGE REMANUFACTUIRNG INSTRUCTIONS
5. Start to separate the two halves.
You will see a small white plastic tab on the drum gear assembly, that blocks you from removing the waste chamber.
Lift up on that tab while pulling the end cap out to separate the two halves.
© 2017 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.
uninet
imaging.com
