background image

Conductive tote boxes

Opaque shielding bags

Transparent metallized shielding bags

Transparent shielding tubes

Cleaning your computer

Cleaning your computer regularly removes dirt and debris so that your device continues to operate at its best. 
Use the following information to safely clean the external surfaces of your computer.

Enabling HP Easy Clean (select products only)

HP Easy Clean helps you to avoid accidental input while you clean the computer surfaces. This software 
disables devices such as the keyboard, touch screen, and touchpad for a preset amount of time so that you 
can clean all computer surfaces.

1.

Start HP Easy Clean in one of the following ways:

Select the Start menu, and then select HP Easy Clean.

– or –

Select the HP Easy Clean icon in the taskbar.

– or –

Select Start, and then select the HP Easy Clean tile.

2.

Now that your device is disabled for a short period, see 

Removing dirt and debris from your computer 

on page 22

 for the recommended steps to clean the high-touch, external surfaces on your computer. 

After you remove the dirt and debris, you can also clean the surfaces with a disinfectant. See 

Cleaning 

your computer with a disinfectant on page 23

 for guidelines to help prevent the spread of harmful 

bacteria and viruses.

Removing dirt and debris from your computer

Here are the recommended steps to clean dirt and debris from your computer.

For computers with wood veneer, see 

Caring for wood veneer (select products only) on page 24

.

1.

Wear disposable gloves made of latex (or nitrile gloves, if you are latex-sensitive) when cleaning the 
surfaces.

2.

Turn off your device and unplug the power cord and other connected external devices. Remove any 
installed batteries from items such as wireless keyboards.

CAUTION:

To prevent electric shock or damage to components, never clean a product while it is turned 

on or plugged in.

3.

Moisten a microfiber cloth with water. The cloth should be moist, but not dripping wet.

IMPORTANT:

To avoid damaging the surface, avoid abrasive cloths, towels, and paper towels.

4.

Wipe the exterior of the product gently with the moistened cloth.

22

Chapter 4   Removal and replacement procedures preliminary requirements

Summary of Contents for Chromebook Pro c640 G2









































































Reviews: